Bose Backpocket Knife Construction/114backpocketconst.jpgPrevious | Home | Next |
Peening the small pins on inside of the liners first. Once that is good, the
liner is layed inside-down on the marble block below the cutlers steady seen
here. There is sandpaper taped to the top of it and it is dead flat and used,
in this case,
to sand off any high spots and re-flatten the inside of the liner. |
© Copyright 2007 - 2010 BoseKnives.com.
All rights reserved.
Content may be reproduced for personal use only.
Please report problems with this page and associated links to Webmaster